Swamp Cooler Repair Cost Calculator

Pick what the cooler is doing, what kind it is, and how hard the roof is to reach, and this returns the typical range for the repair. Every figure comes off our own pricing page; there is no lead form behind it and no email box to fill in.

Two honest notes before you use it. The service call covers the roof visit and the first hour, and most Albuquerque repairs finish inside that hour because our trucks carry the common pumps, floats, belts, and aspen pads. The thing no calculator can see is a rusted pan or rotted pad tracks on an old cooler, which turns a repair into a replacement conversation. If your unit is past fifteen years old, plan on hearing both numbers, and ask about the PNM rebate of up to $400 on a qualifying new down-draft or side-draft with 12 inch rigid media.

How each choice moves the range

• Symptom tells the tool which parts are likely in play. Warm air is the pump, float, or pads on most calls, which is why it lands lowest; the blowing warm air page has the five-minute check if you want to narrow it yourself. A cooler that will not run at all points at the blower motor and its wiring, and that is the pricier end.
• Cooler type scales the parts. A side-draft or window unit is ground-level work with smaller parts. A big two-speed unit takes a larger motor and a larger pump, and pump sizing follows CFM, so a mismatched pump blows warm again in two weeks.
• Roof access is time. Flat roofs in Nob Hill and the older valley neighborhoods and two-story pitched roofs in Rio Rancho both add ladder work, and on some jobs a second set of hands.
• Age is the second-part risk. Past ten years a cooler often needs the belt or the float at the same visit as the pump. Past fifteen, the pan is the question.

If the number looks reasonable, send it to the form with one click and we arrive already knowing what you saw. If it does not, the $120 to $250 spring start-up is the visit that catches most of these in April instead of July.